Test Manager Sample Question Set 1

Test Manager Sample Question Set 1 

Q-1: Which of the following is an example of testing as part of the requirements specification phase of a project?
1. A requirements review meeting
2. A business analyst eliciting requirements
3. A database administrator designing a table
4. A test results report showing requirements coverage

Q-2: Assume you are a test manager working on a project to create a programmable thermostat for home use to control central heating, ventilation, and air conditioning (HVAC) systems. This project is following a sequential lifecycle model, specifically the V-model. Currently, the system architects have released a first draft design specification based on the approved requirements specification released previously.
Identify all of the following that are appropriate test tasks to execute at this time:
1. Design tests from the requirements specification
2. Analyze design-related risks
3. Execute unit test cases
4. Write the test summary report
5. Design tests from the design specification

Q:-3 You are the manager of a bank's quality assessment group, in charge of independent testing for banking applications. You are working on a project to implement an integrated system that will use three off-the-shelf systems to manage a bank's accounts-receivable system.
Identify all of the following that are test levels that you would expect to directly manage:
1. Component testing for each system
2. Component integration testing for each system
3. System testing for each system
4. Contract acceptance testing for each system
5. System integration testing

Q-4: Which of the following is generally applicable to demonstrating compliance to regulations for safety critical systems?
1. Test traceability
2. ISO 61508
3. Usability testing
4. Employee evaluations

Q-5: Which of the following is an accurate statement that captures a difference between a trend chart showing the total number of bugs discovered and resolved during test execution and a trend chart showing the total number of test cases passed and failed during test execution?
1. The bug trend chart will reveal test progress problems while the test case trend chart
will not.
2. The bug trend chart will show test coverage while the test case trend chart will not.
3. The test case trend chart will reveal test progress problems while the bug trend chart
will not.
4. The test case trend chart will show test coverage while the bug trend chart will not.

Q-6: Considering the typical objectives of testing that are identified in the Foundation syllabus, which of the following metrics can we use to measure the effectiveness of the test process in achieving one of those objectives?
1. Average days from defect discovery to resolution
2. Lines of code written per developer per day
3. Percentage of test effort spent on regression testing
4. Percentage of requirements coverage

Q-7: Assume you are a test manager working on a project to create a programmable thermostat for home use to control central heating, ventilation, and air conditioning (HVAC) systems. This project is following a sequential lifecycle model, specifically the V-model. Your test team is following a risk-based testing strategy augmented with a reactive testing strategy during test execution to ensure that key risks missed during risk analysis are caught.
Of the following statements, identify all that are true about the test plan.
1. The test plan should include risk analysis early in the process.
2. The test plan should list the requirements specification as an input to the risk analysis.
3. The test plan should assign specific bugs to specific developers.
4. The test plan should discuss the integration of reactive test techniques into test
execution.
5. The test plan should specify overall project team metrics used to determine bonuses

Q-8: Which of the following is a test document in which you would you expect to find the preconditions to start executing a level of testing?
1. Test plan
2. Test design specification
3. Incident report
4. Project plan

Q-9: Which of the following is the most likely reason a user might be included in test execution?
1. Their application domain knowledge
2. Their technical expertise
3. Their testing expertise
4. Their management expertise

Q-10: You are the manager of a bank's quality assessment group, in charge of independent testing for banking applications. You have just concluded a project to implement an integrated system that will use three off-the-shelf systems to manage a bank's accounts-receivable system. During the project, you found that one of the vendor's systems, while comprising approximately the same amount of functionality and of roughly the same complexity as the other two systems, had significantly more defects. Making no assumptions other than ones based on the information provided here, which of the following is a reasonable improvement to the test process for subsequent projects involving this vendor?
1. Impose retroactive financial penalties on this vendor for the number of bugs delivered
on this project.
2. Perform an acceptance test for all systems received, with particular rigor for this vendor.
3. Cancel the contract with this vendor and put it on an industry blacklist.
4. Require the vendor's developers to attend training to improve their ability to write
quality code.

Q-11: Which of the following is a project risk mitigation step that you might take as a test manager?
1. Testing for performance problems
2. Hiring a contractor after a key test analyst quits
3. Procuring extra test environments in case one fails during testing
4. Performing a project retrospective using test results

Q-12: You are planning the testing for an integrated system that will use three off-the-shelf components to manage a bank's accounts-receivable system. You are conducting an informal quality risk analysis session with project and system stakeholders to determine what test conditions should be tested and how much each test condition should be tested. Which of the following is a quality risk item that you might identify in this quality risk analysis session?
1. Failure of a component vendor to conduct adequate component testing
2. Calculation of excessive late-payment penalties for invoices
3. On-time payment of all invoices for international vendors
4. Calculation of risk priority using likelihood and impact

Q-13: During a formalized quality risk analysis session following the Failure Mode and Effect Analysis technique, you are calculating risk priorities. Which of the following are major factors in this calculation?
1. Severity and priority
2. Functionality, reliability, usability, efficiency, maintainability, and portability
3. Loss of a key contributor on the test team
4. Loss of a key contributor on the development team

Q-14: Assume you are a test manager in charge of integration testing, system testing, and acceptance testing for a bank. You are working on a project to upgrade an existing automated teller machine system to allow customers to obtain cash advances from supported credit cards. The system should allow cash advances from $20 to $500, inclusively, for all supported credit cards. The supported credit cards are American Express, Visa, Japan Credit Bank, Eurocard, and MasterCard.
Which of the following statements best associates a key stakeholder with the kind of input that stakeholder can provide during a quality risk analysis?
1. A tester can provide input on the likelihood of a risk item.
2. A developer can provide input on the impact of a risk item.
3. A business analyst can provide input on the likelihood of a risk item.
4. A help desk staffer can provide input on the impact of a risk item.

Q-15: Which of the following is a situation in which you would expect an iterative quality risk analysis to result in the largest number of new or changed risk items and risk levels?
1. You perform a risk analysis on the final requirements specification and subsequently
receive a draft design specification.
2. A tester leaves after test design is complete, and you hire a new tester to replace her.
3. The development manager hires two additional programmers after the quality risk
analysis is complete.
4. You perform a risk analysis on the final requirements specification and then that
document is placed under formal configuration management.

Q-16: Assume you are a test manager working on a project to create a programmable thermostat for home use to control central heating, ventilation, and air conditioning (HVAC) systems. In addition to the normal HVAC control functions, the thermostat also has the ability to download data to a browser-based application that runs on PCs for further analysis. During quality risk analysis, you identify compatibility problems between the browser-based application and the different PC configurations that can host that application as a quality risk item with a high level of likelihood. You plan to perform compatibility testing to address this risk.
Which of the following is a way in which you might monitor the effect of testing on the reduction of this risk during test execution?
1. Reduce the number of supported PC configurations.
2. Assign more testers to cover compatibility than testers to cover functionality.
3. Analyze the number of defects found that relate to this risk item.
4. Plan to test the most common PC configurations.

Q-17: Which of the following is an example of a project where failure mode and effect analysis would be a better choice for risk analysis?
1. It is the project team's first application of risk-based testing.
2. The system under test is both complex and safety critical.
3. The system under test is a financial system.
4. Minimizing the amount of documentation is a key concern.

Q-18: Assume you are a test manager in charge of integration testing, system testing, and acceptance testing for a bank. You are working on a project to upgrade an existing automated teller machine system to allow customers to obtain cash advances from supported credit cards. The system should allow cash advances from $20 to $500, inclusively, for all supported credit cards. The supported credit cards are American Express, Visa, Japan Credit Bank, Eurocard, and MasterCard.
In the master test plan, the Features to be Tested section lists the following:
1. All supported credit cards
2. Language localization
3. Valid and invalid advances
4. Usability
5. Response time
Relying only on the information given above, select the features to be tested for which
sufficient information is available to proceed with test design.
1. I
2. II
3. III
4. IV
5. V

Q-19: Continue with the scenario described in the previous question. Which of the following topics would you need to address in detail in the master test plan?
1. A strategy for regression testing
2. A list of advance amount boundary values
3. A description of intercase dependencies
4. A logical collection of test cases

Q-20: Assume you are a test manager working on a project to create a programmable thermostat for home use to control central heating, ventilation, and air conditioning (HVAC) systems. In addition to the normal HVAC control functions, the thermostat also has the ability to download data to a browser-based application that runs on PCs for further analysis.
The company test strategy calls for each test case to be run on all combinations of
configuration options. For this system, you identify the following factors and, for each factor, the following options:
 Supported PC/thermostat connections: USB and Bluetooth
 Supported operating systems: Windows 2000, Windows XP, Windows Vista, Mac X, Linux
 Supported browsers: Internet Explorer, Firefox, Opera
Because there are 10 test cases that involve downloading data, this would require running 300 test cases, each of which requires an hour to run.
With management approval, you decide to test five configurations, covering each option but not all the possible pairs and triples of options.
Which of the following statements describes the best option for documenting this deviation from the test strategy?
1. In the test design specifications, explain the alternate approach planned for this project
and how to set up the test configurations.
2. In the test procedure specifications, explain which test cases should be run against
which configurations.
3. In the master test plan, explain the alternate approach planned for this project and why
this approach is sufficient.
4. In the test item transmittal report, explain the alternate approach planned for this
project and which test items were tested against which configuration.

Q-21: Continue with the scenario described in the previous question. You are writing a master test plan to cover integration testing and system testing of the programmable thermostat. Select all of the following statements that are true.
1. The approach section should describe how to test the integration of the thermostat with
other parts of the HVAC system.
2. The schedule section should describe when integration testing should start and when
system testing should start.
3. The environmental needs section should address who is responsible for each level of
testing.
4. The test items section should describe the equipment required for each level of testing.
5. The test deliverables section should describe results reporting for each level of testing.

Q-22: 12. Continue with the scenario described in the previous questions, where you are a test manager working on a project to create a programmable thermostat for home use to control central heating, ventilation, and air conditioning (HVAC) systems. One critical quality risk identified for this system is the possibility of damage to the HVAC system caused by excessive cycling of the compressor (i.e., turning the unit on and off repeatedly in short intervals). Which of the following is a reasonable way to use an IEEE 829 test plan to direct appropriate testing for this risk?
1. Write a separate test plan for this level of testing.
2. List the feature that prevents excessive cycling as a feature to be tested.
3. Detail all of the requirements of the programmable thermostat in the introduction of the
test plan.
4. Include a fully functioning compressor as one of the test items.

Q-23: Continue with the scenario from the previous question.
Historically, on seven past projects, the test team has found approximately 12 bugs during system test for each person-month of development team effort. Five developers are assigned to work on a new project that is scheduled to last six months. Assume that the cumulative number of bugs found, as shown in your convergence chart, has flattened at 351 defects. Based on this information only, which of the following statements is most likely to be true?
1. You would expect to find exactly 20 more defects before the end of system test.
2. You have omitted tests for at least one critical quality risk category.
3. You needed a test team of at least three testers for optimum testing.
4. You have found roughly the number of defects you would expect to find during system
test.

Q-24: Continue with the scenario from the previous question.
Assume that this project is following an iterative lifecycle, while the previous projects for which you have bug metrics followed a sequential lifecycle. Assuming no other dissimilarities between this project and the previous projects exist, which of the following might be a reason to question the accuracy of the predicted number of defects?
1. People factors
2. Material factors
3. Process factors
4. Quality factors

Q-25: You are a test manager in charge of system testing on a project to update a cruise-control module for a new model of a car. The goal of the cruise-control software update is to make the car more fuel efficient.
You have written a first release of the system test plan based on the final requirements
specification. You receive an early draft of the design specification. Identify all of the following statements that are true.
1. Do not update the system test plan until the final version of the design specification is
available.
2. Produce a draft update of the system test plan based on this version of the design
specification.
3. Check this version of the design specification for inconsistencies with the requirements
specification.
4. Participate in the final review of the design specification but not any preliminary reviews
of the design specification.
5. Review the quality risk analysis to see if the design specification has identified additional
risk items.

Q-26: 16. Which of the following is the best example of a technique for controlling test progress in terms of the residual level of quality risk?
1. Counting the number of defects found and the number of defects resolved
2. Counting the number of test cases passed and the number of test cases failed
3. Counting the number of requirements that work properly and the number of
requirements with known defects
4. Counting the number of tested risk items without known defects and the number of
tested risk items with known defects

Q-27: You are a test manager in charge of system testing on a project to update a cruise-control module for a new model of a car. The goal of the cruise-control software update is to make the car more fuel efficient.
Halfway through test execution, you find that the test results do not conclusively determine whether fuel efficiency has improved. Identify all of the following actions that you might direct the test analysts to take to help to resolve this problem.
1. Redesign the fuel efficiency tests.
2. Revise the quality risk analysis.
3. Modify the test environment to gather more detailed actual results.
4. Check for consistency in tested fuel mixtures.
5. Report fuel efficiency as apparently unchanged.

Q-28: Assume you are a test manager in charge of integration testing, system testing, and acceptance testing for a bank. You are working on a project to upgrade an existing automated teller machine system to allow customers to obtain cash advances from supported credit cards.
The system should allow cash advances from $20 to $500, inclusively, for all supported credit cards. The supported credit cards are American Express, Visa, Japan Credit Bank, Eurocard, and MasterCard.
During test execution, you find five defects, each reported by a different tester, that involve the same problem with cash advances, with the only difference between these reports being the credit card tested. Which of the following is an improvement to the test process that you might suggest?
1. Revise all cash advance test cases to test with only one credit card.
2. Review all reports filed subsequently and close any such duplicate defect reports before
assignment to development.
3. Change the requirements to delete support for American Express cards.
4. Have testers check for similar problems with other cards and report their findings in
defect reports.

Q-29: You are the manager of a bank's quality assessment group, in charge of independent testing for banking applications. You are working on a project to implement an integrated system that will use three off-the-shelf systems to manage a bank's accounts-receivable system. You are currently managing the execution of system integration testing.
Consider the following bug open/closed or convergence chart.
Which of the following interpretations of this chart provides a reason to not declare the system integration testing complete?
1. The bug find rate has not leveled off.
2. Developers aren't fixing bugs fast enough.
3. The complete set of tests has not yet been run.
4. A number of unresolved bugs remain in the backlog.

Q-30: Which of the following is an example of a cost of internal failure?
1. Finding a bug during testing
2. Training developers in secure coding practices
3. Designing test cases
4. Fixing a customer-detected bug

Q-31: You are the manager of a bank's quality assessment group, in charge of independent testing for banking applications. You are in charge of testing for a project to implement an integrated system that uses three off-the-shelf components to manage a bank's accounts-receivable system.
Which of the following is most likely to be a major business motivation for testing this system?
1. Avoiding loss of life
2. Having confidence in correct customer billing
3. Finding as many bugs as possible before release
4. Gathering evidence to sue the component vendors

Q-32: Which of the following is a risk of outsourced testing that might not apply to distributed testing?
1. Selection of an improper test partner
2. Communication problems created by time zone differences
3. Insufficient skills in some of the test team members
4. Inconsistent test processes across the testing locations

Q-33: You are the manager of a bank's quality assessment group, in charge of independent testing for banking applications. You used quality risk analysis to allocate effort and prioritize
your tests during test preparation. You are currently executing the system integration test. You have finished running each test case once. You are not certain how much time the project management team will allow for additional test execution because regulatory changes might require the system to be activated ahead of schedule.
Based on the severity and priority of the bugs found by each test case, you have calculated weighted failure for each test case. You also know the risk priority number for each test case based on the quality risk item(s) the test case covers. Considering both the weighted failure and the risk priority number, you have reprioritized your test cases for the final days or weeks of testing.
Which of the following is a benefit this reprioritization will provide?
1. If testing is curtailed, you will have expended the minimum amount of effort possible.
2. If testing is extended, you will have time to run all of your tests.
3. If testing is curtailed, you will have run the most important tests.
4. If testing is extended, you will have covered all of the requirements.

Q-34: Which of the following is a benefit of exploratory testing and other reactive test strategies that would not apply to an analytical requirements-based test strategy?
1. The ability to utilize a very experienced test team
2. The ability to accurately predict the residual risk prior to delivery
3. The ability to prevent defects during requirements analysis
4. The ability to test effectively without a complete test basis

Q-35: Which of the following is a type of defect that you can detect more easily in a review than by a dynamic test?
1. Regression
2. Maintainability
3. Performance
4. Reliability

Q-36: Which of the following is a type of review in which you would expect to detect the greatest percentage of defects present in the item under review?
1. Informal
2. Static analysis
3. Simulation
4. Inspection

Q-37: Assume you are a test manager working on a project to create a programmable thermostat for home use to control central heating, ventilation, and air conditioning (HVAC) systems. In addition to the normal HVAC control functions, the thermostat has the ability to download data to a browser-based application that runs on PCs for further analysis. During quality risk analysis, you identify compatibility problems between the browser-based application and the different PC configurations that can host that application as a quality risk item with a high level of likelihood. Select all of the following actions that should occur in the quality and test plans to best ensure that the project team will minimize this risk upon release?
1. Carefully select the list of supported configurations.
2. Review the list of supported configurations with project stake—holders.
3. Support only a single browser based on technical attributes.
4. Downgrade the likelihood of the risk based on available test resources.
5. Test the supported PC configurations early in test execution.

Q-38: Assume you are a test manager in charge of integration testing, system testing, and acceptance testing for a bank. You are working on a project to upgrade an existing automated teller machine system to allow customers to obtain cash advances from supported credit cards.
You have received a requirements specification that states that the system should allow cash advances from $20 to $500, inclusively, for all supported credit cards. Assume that the bank is required contractually to support the following credit cards: American Express, Visa, Japan Credit Bank, Eurocard, and MasterCard.
The bank has given you the responsibility of organizing a review of the requirements
specification. Which of the following is a risk for this review?
1. You do not know the supported credit cards.
2. You do not include the proper stakeholders in the review.
3. You do not know which test levels to address.
4. You do not receive the requirements specification.

Q-39: Assume you are a test manager working on a project to create a programmable thermostat for home use to control central heating, ventilation, and air conditioning (HVAC) systems. In addition to the normal HVAC control functions, the thermostat has the ability to download data to a browser-based application that runs on PCs for further analysis. During quality risk analysis, you identify compatibility problems between the browser-based application and the different PC configurations that can host that application as a quality risk item with a high level of likelihood.
Your test team is currently executing compatibility tests. Consider the following excerpt from the failure description of a compatibility bug report:
1. Connect the thermostat to a Windows Vista PC.
2. Start the thermostat analysis application on the PC. Application starts normally and
recognizes connected thermostat.
3. Attempt to download the data from the thermostat.
4. Data does not download.
5. Attempt to download the data three times. Data will not down—load.
Based on this information alone, which of the following is a problem that exists with this bug
report?
1. Lack of structured testing
2. Inadequate classification information
3. Insufficient isolation
4. Poorly documented steps to reproduce

Q-40: Continue with the previous scenario. Your test team is still executingcompatibility tests. Consider the following excerpt from the failure description of a compatibility bug report:
1. Install the thermostat analysis application on a Windows XP PC.
2. Attempt to start the thermostat analysis application.
3. Thermostat analysis application does not start.
4. Reinstall the thermostat analysis application three times. Thermo—stat analysis
application does not start after any reinstallation.
5. This test passed on the previous test release.
Based on this information alone, which of the following is the most reasonable hypothesis about
this bug?
1. The bug might be a regression.
2. The bug might be intermittent.
3. The application didn't install on Windows XP PCs before.
4. The bug might be a duplicate.


Answers:
1. A
2. A, B, E
3. D, E
4. A
5. C
6. D
7. A, B, D
8. A
9. A
10. B
11. C
12. B
13. A
14. D
15. A
16. C
17. B
18. A, C
19. A
20. C
21. A, B, E
22. B
23. D
24. C
25. A, C, E
26. D
27. A, C, D
28. D
29. D
30. A
31. B
32. A
33. C
34. D
35. B
36. D
37. A, B, E
38. B
39. C
40. A

39 comments:

  1. Can anyone suggest me where to look for more question papers for ISTQB Advanced Test Manager exam?

    ReplyDelete
  2. For ISTQB foundation , test analyst and test manager dumps contact me at completeexamcollection@gmail.com

    ReplyDelete
    Replies
    1. Hi Harsh,

      Do you have ISTQB Test Manager Dump?

      Can you please share them with me. My Email Id is amit1_singh@yahoo.com

      Delete
  3. Hi harsh mohan, could you please send me dumps for istqb test manager gayathirirks@gmail.com

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete
  5. Hi harsh mohan, could you please send me dumps for istqb test manager diya.omshri@gmail.com

    ReplyDelete
  6. Hi harsh mohan, could you please send me dumps for istqb test manager dav.gergis@gmail.com

    ReplyDelete
  7. Hi Harsh,

    Could you please share Test manager dump question/ans with me. My Email Id is tapan.upadhyay@gmail.com

    ReplyDelete
  8. Hi harsh mohan, could you please send me dumps for istqb test manager mohgoni29@googlemail.com

    ReplyDelete
  9. Hi Saurava Singh,

    Thanks for this.
    Any specific reason for you to not to group the questions based on same scenario?? I think it would be better if you can do this.

    There are some dumps here.
    https://www.istqb.guru/istqb-advanced-level-test-manager-dumps-1/

    Hi Harsh Mohan,

    If you have any dumps which are different to what's there in the above location, can you please send them to me.

    Viraj
    virajwijesooriya@gmail.com

    ReplyDelete
  10. Hi harsh mohan, could you please send me dumps for istqb test manager my email is mejachris@gmail.com

    ReplyDelete
  11. Hi Harsh,

    Need dumps/material for CTAL-TM , Test Manager ISTQB.
    Please send it on kukadiyashailesh1@gmail.com

    ReplyDelete
  12. Hello Harsh,

    Can you please send me dumps and materials for ISTQB test manager?

    Email: divyesh.1136@gmail.com

    ReplyDelete
  13. Hello,

    Check the online course at here
    https://www.udemy.com/istqb-advance-level-test-manager/?couponCode=ALLTIMEOFF

    Hope this will help you.

    ReplyDelete
  14. if you haven’t yet thought about protecting your HVAC systems through the cold months then now’s the time to start. What better way to get things moving than reading these five handy tips? heating cooling systems

    ReplyDelete
  15. These question are so useful. Thanks for sharing.

    Heating and Cooling Mississauga

    ReplyDelete
  16. Hi Harsh!
    Could you please send the dumps for CTAL-TM (Test Manager ISTQB) to oksiktest199@gmail.com?

    ReplyDelete
  17. Has anybody recently given ISTQB Advance Level Test Manager? Can you please share the experience how it was?

    ReplyDelete
  18. Hello Harsh,

    Can you please send me dumps and materials for ISTQB test manager?

    Email: abdullah.a86@gmail.com

    ReplyDelete
  19. Hello Harsh,

    Can you please send me dumps and materials for ISTQB test manager?

    Email: tmkhetshane@yahoo.com

    ReplyDelete
  20. Hi,
    can you please Test Manager Dumps to restaino.claudio@gmail.com ?

    Thank you in advance

    Best Regards
    Claudio

    ReplyDelete
  21. Hello Harsh,

    Cuould you please be able to send me dumps and materials for ISTQB test manager? Email:runjhun123@hotmail.com

    Thanks in anticipation

    ReplyDelete
  22. I was very interested in the article , it’s quite inspiring I should admit. I like visiting your site since I always come across interesting articles like this one. Keep sharing! Regards. Read more about
    Security Testing Services
    Test Automation Services
    Software Testing Services
    Compatibility Testing Services
    Regression Testing Services

    ReplyDelete
  23. Could you also send me the dumps at anamika.buet@gmail.com

    THanks in advance

    Anamika

    ReplyDelete
  24. Cuould you please be able to send me dumps and materials for ISTQB test manager? Email:paslavska.m@gmail.com

    ReplyDelete
  25. I'm looking for ISTQB Advanced Test Manager Question dumps. Could you please share it to bharti06@gmail.com

    ReplyDelete
  26. Cuould you please be able to send me dumps and materials for ISTQB test manager? Email:mm.iliqnova@gmail.com

    ReplyDelete
  27. Cuould you please be able to send me dumps and materials for ISTQB test manager? Email:leo.rojas.oscanoa@gmail.com

    ReplyDelete
  28. Can you please share the ISTQB Advanced Test Manager latest questions dumps to kubra_gizem_@hotmail.com

    ReplyDelete
  29. Can you please share the ISTQB Advanced Test Manager latest questions dumps to as well as also older question dumps to this mailbox: mariovolage@gmail.com

    Thank you

    ReplyDelete
  30. Hi Dear,
    Could you please share the ISTQB Test Manager Dumps at pankhuri16@gmail.com
    Many Thanks in advance.

    Kind Regards,
    Pankhuri Bhatt Saxena

    ReplyDelete
  31. Hello,
    I want to share here my successful experience with ISTQB exam dumps so that it can be helpful for you in some way. I found all the information that was necessary for a perfect preparation of NEW ISTQB exam dumps questions. I have not seen any material like Real ISTQB dumps.

    ISTQB Advanced Technical Test Analyst
    ATTA
    Advanced Technical Test Analyst
    ISTQB Technical Test Analyst
    ATA
    Advanced Test Analyst
    ISTQB Test Manager
    ATM
    Advanced Test Manager
    ATA
    ISTQB Advanced Test Analyst
    ATM
    ISTQB Certified Tester Advanced Level - Test Manager [Syllabus 2012]
    ISTQB Foundation Level (CTFL)
    CTFL-Foundation
    ISTQB Certified Tester Foundation Level

    https://www.dumpssure.com/istqb-questions-answers.html

    ReplyDelete
  32. This is my first time to site a ISTQB, so you will know how nervous I was! Thanks for your help, ExamforSure! I passed. I think 95% questions are more or less the same as your guidance. Some questions with the answer are in the different sequence, and, sorry to point out that one answer of your questions is incorrect, I'll email you to let you know, you guys need to revise it. Well, I think your ExamforSure guidance is still more accurate than others. The most important thing is I got passed :) Paul Hussler

    https://www.examforsure.com/istqb-exam-dumps.html

    ReplyDelete
  33. This blog will help to get more ideas. This is very helpful for Software Testing learners. Thank you for sharing this wonderful site. If someone wants to know about Software QA services this is the right place for you Software QA Companies. Visit here

    21 CFR Part 11 compliance

    HIPAA compliance Services

    Pci Compliance Testing services

    ReplyDelete
  34. Do you need an urgent loan of any kind? Loans to liquidate debts or need to loan to improve your business have you been rejected by any other banks and financial institutions? Do you need a loan or a mortgage? This is the place to look, we are here to solve all your financial problems. We borrow money for the public. Need financial help with a bad credit in need of money. To pay for a commercial investment at a reasonable rate of 3%, let me use this method to inform you that we are providing reliable and helpful assistance and we will be ready to lend you. Contact us today by email: daveloganloanfirm@gmail.com Call/Text: +1(501)800-0690 And whatsapp: +1 (501) 214‑1395

    NEED A LOAN?
    Ask Me.

    ReplyDelete
  35. DO YOU NEED A PERSONAL/BUSINESS/INVESTMENT LOAN? CONTACT US TODAY VIA WhatsApp +19292227023 Email drbenjaminfinance@gmail.com

    HELLO
    Loan Offer Alert For Everyone! Are you financially down and you need an urgent credit/financial assistance? Or are you in need of a loan to start-up/increase your business or buy your dream house. Are you in search of a legit loan? Tired of Seeking Loans and Mortgages? Have you been turned down by your banks? Have you also been scammed once? Have you lost money to scammers or to Binary Options and Cryptocurrency Trading, We will help you recover your lost money and stolen bitcoin by our security FinanceRecovery Team 100% secured, If you are in financial pains consider your financial trauma over. We Offer LOANS from $3,000.00 Min. to $30,000,000.00 Max. at 2% interest rate NO MATTER YOUR CREDIT SCORE. GET YOUR INSTANT LOAN APPROVAL 100% GUARANTEED TODAY VIA WhatsApp:+19292227023 Email: drbenjaminfinance@gmail.com


    ReplyDelete
  36. The answer to question 4 is wrong. The answer should be B

    ReplyDelete